+86-15258555916
[email protected]
The Floor Mounted Outlet Air Cooler is a refrigeration unit designed for efficient and uniform cooling, making it particularly suitable for large cold storage facilities, food processing plants, pharmaceutical storage, and various environments requiring precise temperature control. Its top-discharge design effectively solves the problems of uneven airflow and temperature dead zones that can occur with traditional air coolers. Compared to other types of air coolers, the floor-mounted top-discharge air cooler has higher air circulation efficiency, maintaining a stable low-temperature environment over a wider area and ensuring temperature consistency throughout the cold storage.
It is especially suitable for large cold storage facilities, meat processing plants, seafood preservation, fruit and vegetable storage, and pharmaceutical cold storage. The floor-mounted top-discharge air cooler provides these industries with an efficient, stable, and energy-saving cooling solution through its superior temperature control capabilities.
Equipment Parameters Introduction
Detail Display
Contact Us
Equipment Parameters Introduction
| Model | Refrige- rating Capacity |
Cooling area |
Diameter ofFeed inlet |
Diameter of Inlet Pipe |
Wind rate | Quantiny | Fan blade |
Voltage | Power | Ai throw | Length | Width | Higth | Installing Dimension |
|
| A | B | C | D | E | |||||||||||
| 6mm Pitch of fins |
△T=10℃ T=-25℃ |
m² | mm | mm | m³/h | N | mm | V | W | m | mm | mm | mm | mm | mm |
| LDD-310 | 62 | 310 | 25 | 50 | 3×12000 | 3 | 600 | 380 | 3×1500 | 20 | 3250 | 840 | 1250 | 670 | 2920 |
| LDD-360 | 72 | 360 | 25 | 50 | 4×12000 | 4 | 600 | 380 | 4×1500 | 20 | 3550 | 840 | 1250 | 670 | 3240 |
| LDD-400 | 80 | 400 | 2×25 | 2×50 | 4×12000 | 4 | 600 | 380 | 4×1500 | 20 | 3950 | 840 | 1250 | 670 | 3640 |
| LDD-500 | 100 | 500 | 2×25 | 2×50 | 4×13000 | 4 | 650 | 380 | 4×2200 | 20 | 4010 | 1040 | 1250 | 870 | 3640 |
| LDD-600 | 120 | 600 | 2×25 | 2×50 | 4×13000 | 4 | 650 | 380 | 4×2200 | 20 | 4410 | 1040 | 1250 | 870 | 4040 |
| LDD-700 | 140 | 700 | 3×25 | 3×50 | 4×13000 | 4 | 650 | 380 | 4×2200 | 20 | 4410 | 1040 | 1350 | 870 | 4040 |
| LDD-800 | 160 | 800 | 3×25 | 3×50 | 4×15000 | 4 | 700 | 380 | 4×3000 | 20 | 4410 | 1040 | 1450 | 870 | 4040 |
| LDD-1000 | 200 | 1000 | 4×25 | 4×50 | 5×15000 | 5 | 700 | 380 | 5×3000 | 20 | 4980 | 1040 | 1450 | 870 | 4665 |
| LDD-1200 | 240 | 1200 | 4×25 | 4×50 | 6×15000 | 6 | 700 | 380 | 6×3000 | 20 | 5640 | 1140 | 1450 | 870 | 5320 |
Detail Display

Contact Us
A procurement manager at a frozen food plant in Shandong recently placed three quotations side by side. On paper, the refrigeration equipment manufacturers looked identical: similar capacity, comparable coil area, and every unit built arou...
READ MOREWalk into a cold storage room and feel the air near the door. If one corner is warmer than another, or the temperature drifts upward every afternoon, the industrial air cooler mounted inside the room is usually the first place to look. It ...
READ MOREWhen a food-processing plant in a water-scarce region evaluates its refrigeration options, the condenser choice often decides whether the project gets approved. Air-cooled condensers eliminate cooling-water makeup entirely, remove the risk...
READ MORE